Kenwood
Search



X1200M
eXcelon Gouriki Mono Digital Power Amplifier

CEA-2006 Standard



Overview
Highlights
 

Excelon Performance & Quality - eXcelon products incorporate the latest technologies and deliver the highest sonic performance. From advanced audio tuning capabilities, crossover and equalizer systems, high voltage preouts and two-year warranty, eXcelon represents the very best product available.

  
 
Dual Power Supply - This design results in two power supplies working together inside the amplifier to help stabilize the internal operating voltage under the most demanding conditions, ultimately reducing noise and improving performance compared to an overworked single power supply.
  
 
Dual Sigma Drive -This advanced negative feedback circuit eliminates unwanted speaker movement, resulting in reduced distortion and accurate low frequency audio reproduction.
  
 

Air Cooling - By positioning the fan in close proximity to heat producing circuitry, heat is dissipated efficiently. This allows the amplifier to operate at comfortable temperature levels even under the most stressful conditions.

  
 

Variable Low-Pass Filter - Filters high frequencies out of the music and improves efficiency and sound quality by allowing only the low frequencies to pass to the subwoofer.

  
 

Infrasonic Filter - Eliminates frequencies too low to hear and too low for a subwoofer to reproduce. This improves subwoofer control, power handling and amplifier efficiency and prevents unecessary oscillations causing distortion.

  

Gold-Plated Line Input Terminals - This type of connector is non-corrosive and will maintain conductivity for long periods of time. Gold-plated connectors inherently have lower contact resistance resulting in wider frequency response, lower distortion with improved dynamic range and signal to noise ratio.

  

Gold-Plated Battery/Ground Terminals - These HEX-type terminals can accommodate up to AWG 4 - AWG 6 battery and ground wire thickness for better voltage maintenance from the vehicle's battery. The HEX type design allows for maximum tightening and contact onto the wire.

  

Gold-Plated Speaker Output Terminals - These HEX-type terminals can accommodate up to AWG 8 - AWG 12 speaker wire thickness for better signal delivery to speakers. The HEX type design allows for maximum tightening and contact onto the wire.

 

General Features
Operating Voltage

14.4V (11V - 16V allowable)

Current Consumption90 A
Dimensions (W x H x D)380 x 66 x 286 mm (14-15/16 x 2-5/8 x 11-1/4)
Weight5.0 kg (11.0 lbs)
Specifications

800 W x 1

   RMS Watts per channel @ 4 ohms, 1% THD+N
75 dBA   Signal to Noise Ratio (Reference: 1 Watt into 4 ohms)
Max Power Output2400 W
Rated Power Output
14.4 V    
800 W x 1   (4Ω) (20 Hz - 200 Hz, 1.0% THD)
1200 W x 1   (2Ω) (100 Hz, 1.0% THD)
Frequency Response20-200Hz(±1dB)
Input Sensitivity 0.2 V - 5.0 V (MIN-MAX)
Input Impedance10 kΩ
Signal to Noise Ratio105 dB
Low Pass Filter Frequency
(-12 dB/oct.)  
50 Hz - 200 Hz (variable) Low-Pass Filter Frequency
High Pass Filter Frequency-
Dimensions (W x H x D)380 x 66 x 286 mm (14-15/16 x 2-5/8 x 11-1/4)

DownloadFile TypeDescriptionRelease Date
DownloadCatalogs2011 Excelon Car Entertainment CatalogFeb 24, 2011
DownloadOwners ManualsOwners Manual - EnglishMar 31, 2011
DownloadOwners ManualsOwners Manual - FrenchMar 31, 2011

*Product descriptions, specifications and features are subject to change without notice. For proper fit and compatibility check with your authorized Kenwood dealer.

© 2012 Kenwood Electronics Canada Inc.